User Manual

Table Of Contents
49
2900H EN 20071108 Basic operation (operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
When the Drystar 5500 is in the ready state:
1 The display shows the following message:
2 Press the Unlock button to initiate the loading sequence.
The printer is ready to receive a new film pack when the following message appears:
3 Open the lower input tray.
4 Load a new film pack.
Refer to ‘Film loading procedure’ on page 50.
You have 5 seconds to open the input tray. If you do not open the tray within that
time, the first screen (step 1 or 5 respectively) is presented again, or printing is
resumed when a job is received for which media is available.
Blinking