User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
29
2900H EN 20071108 Introducing the Drystar 5500
DRYSTAR 5500/5503 REFERENCE MANUAL
The keypad
To access the keypad, push the keypad cover backward.
The keypad is located under the keypad cover.
The Drystar 5500 keypad features the following keys:
Emergency
key
To rearrange the print queue: emergency jobs can
be placed at the top of the queue to be printed with
priority. Refer to ‘Assigning emergency priority’ on
page 41.
Delete key
To delete print jobs. Jobs that are deleted will not be
printed. Refer to ‘Deleting print jobs’ on page 42.
Key-
operator key
To access the advanced functions of the Key-
operator mode. Refer to Chapter 3, ‘Advanced
operation (Key-operator mode)’.
Service key
To access service-level functions. Reserved for
trained service personnel.
Escape key
To quit the current function or exit a menu without
saving modifications.
Confirm key
(In Key-operator mode)
• To select a menu.
• To accept an entry in a menu.