User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
21
2900H EN 20071108 Introducing the Drystar 5500
DRYSTAR 5500/5503 REFERENCE MANUAL
Labels Drystar 5503:
The following labels are located behind the drum compartment door:
• Open the drum compartment door by pulling its handle.
• The labels are visible inside the printer.
Power cord regulations
• Use attached power cord set to the product.
• Do not use attached power cord set for other electric equipment.
1 CCC label
2 CE, TÜV and cULus labels
Type 5364/100 Date: MM.JJJJ
F-Nr. xxxxx MFR I.D.: P
100-120/220-240V 6 / 3A 50-60Hz
AGFA GEVAERT N.V.
Made in Germany
MEDICAL ELECTRIC
EQUIPMENT
WITH RESPECT TO ELECTRIC
SHOCK, FIRE, AND MECHANICAL
HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 /
CAN/CSA C22.2 NO.601.1
9F03
1
2