User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
189
2900H EN 20071108 Preventive maintenance and replacements
DRYSTAR 5500/5503 REFERENCE MANUAL
3 Clean the upper roller
Use a dust roller cleaning tissue to clean the roller. Turn the roller at its axle during
cleaning and rub in the length direction of the roller.
Do not touch the discharge brushes!
Keep all the other covers closed as much as possible to avoid extra dust
into the printer.
Refer to ‘ABC ordering codes’ for the ABC code of the dust roller cleaning tissue.
As the rollers are sticky it’s very important to use a lint free cloth!
Never clean the roller with water or soap.