User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
16
2900H EN 20071108Introducing the Drystar 5500
DRYSTAR 5500/5503 REFERENCE MANUAL
Restriction of the Use of Certain Hazardous Substances (RoHS)
The RoHS (Restriction of Hazardous Substances)
Directive No 2002/95/EC of the European Union focuses on the
restriction of the use of certain hazardous substances in electrical
and electronic equipment.
Member States of the European Union (EU) shall ensure that, from 1
July 2006, new electrical and electronic equipment put on the
market (EU countries), does not contain the following substances
above specified concentrations at the homogeneous material level:
• Cadmium (0.01%)
•Hexavalent chromium (0.1%)
•Lead (0.1%)
•Mercury (0.1%)
• Polybrominated biphenyls (PBB) (0.1%)
• Polybrominated diphenyl ethers (PBDE) (0.1%)
At the date of preparation of this manual, Medical Devices are
exempted of the RoHS Directive.
However Agfa HealthCare is committed to meet the requirements of
the European RoHS Directive in case the exemption is cancelled.
If there is a RoHS label at the rear of the printer it means that the
printer is RoHS compliant and does not contain the above listed
substances above the mentioned concentrations at the homogeneous
material level.
In case of questions or more detailed information do not hesitate to
contact your local sales organization.