User Manual

136
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
6 Press the Up/Down arrow keys to select the appropriate modality type.
7 Press the Confirm key to continue, or the Escape key to return to the previous
step.
The ‘Enter Called AE-title’ screen is displayed:
8 Enter the Called AE-title by means of the arrow keys. Refer to ‘Data entry’ on
page 33. Make sure not to enter more than 16 characters.
The ‘Select output tray for <daily name or AE-title>’ screen will appear:
Press the Up/Down arrow keys to navigate and (de-)install output trays with the Left/
Right arrow keys. You can install several output trays.
9 Press the Confirm key to install the chosen output trays, or the Escape key to
quit the procedure without any changes.
10 Press the Confirm key to continue, or the Escape key to return to the previous
step.
The ‘Select preferred film type for modality’ screen will appear:
Each installed output tray are marked with an *.
‘DRYSTAR DT 2 Mammo’ is only shown in the list when the option for the
mammography application is activated. Refer to ‘Options and accessories’ on
page 235.
You can find the film type on the film packaging, e.g. ‘DRYSTAR DT 2 C’.
<daily name or AE-title>
* position 1 (upper)
position 2
* position 3
p
osition 4
(
lower
)
<daily name or AE-title>
DRYSTAR DT 2 B
DRYSTAR DT 2 C
DRYSTAR DT 2 Mammo