User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
134
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
12 Press the Confirm key to continue, or the Escape key to return to the previous
step.
The ‘Enter Domain Name’ screen is displayed:
13 Enter the Domain name by means of the arrow keys.
14 Press the Confirm key to continue, or the Escape key to return to the previous
step.
15 Press the Confirm key to continue, or the Escape key to return to the previous
step.
A screen will appear summarizing the information you have entered:
16 Press the Confirm key to go to step 2 of the installation wizard or press the
Escape key to repeat step 1.
• When you have pressed the Confirm key, the following screen will appear:
17 Press the Confirm key to continue.
Refer to ‘Data entry’ on page 33.
Make sure not to enter more than 255 characters.
Note that blank spaces will not be filled in.
DS5500
ds5500
Domain : xxxxxxx
e.g.
Prt IP-ad:123.123.123.123
Netmask:255.255.255.255
Router:123.123.123.123