User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
103
2900H EN 20071108 Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
4 Press the Confirm key to continue, or the Escape key to quit.
The ‘Select image-file’ screen is displayed:
5 Press the Up/Down arrow keys to select the desired .tif-file, followed by the
Confirm key.
6 Define the input tray for printing.
The ‘Select input tray’ screen is displayed:
7 Press the Up/Down arrow keys to select the desired input tray, followed by the
Confirm key.
The ‘Number of copies’ screen is displayed:
8 Press the arrow keys to increment/decrement the number. Press the Left/Right
arrow keys to move through the field.
For more info, refer to ‘Data entry’ on page 33.
1 User image1.tif
2 User image1.tif
3 User image1.tif