User's Manual

Driver Installation and Configuration

6. The “Network Configuration Settings” dialog box will open.

Configuration Name – Enter the configuration name.

Network Name (SSID) – Set the “SSID” (Service Set ID) to the same as that used by

the ad hoc workgroup or access point you want to connect to (the Access Point

default is “ANY”).

Note: The SSID is case sensitive and can consist of up to 32 alphanumeric characters.

Network Connection – Set “Network Connection” to “Ad Hoc” or

“AP (Infrastructure)” depending on the type of network you want to connect to

(see page 15).

Power Saving – Enable the “Power Saving” mode to reduce power loading (the

default is “Normal”).

Locally Administered Address – Check this box if you wish to set your own MAC

address for the Cardbus Adapter. A MAC address consists of 6 hexadecimal

numbers.

7. Click “OK” when you have finished the configuration profile. This returns you to the

card properties dialog box (see step 5 on page 11). The profile can be modified by

selecting the profile name from the “Configuration List” and clicking on “Modify.”