802.
Quick Installation Guide WirelessTM 802.
Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
Contents Introduction Package Checklist System Requirements Applications Hardware Description Hardware Installation Driver Installation and Configuration Windows 98/Me/2000/XP Driver Installation Windows 98 Configuration Windows Me/2000/XP Configuration Network Configuration and Planning Network Topologies Ad Hoc Wireless LAN Infrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCs Troubleshooting Adapter Installation Problems Network Connection Problems The 802.
Contents ii
Introduction The WirelessTM 802.11a PC Card is a 54 Mbps wireless network card that seamlessly integrates with existing Ethernet networks to support applications such as mobile users or temporary conferences. This solution offers fast, reliable wireless connectivity with considerable cost savings over wired LANs (which include long-term maintenance overhead for cabling). Just plug wireless cards into your notebook PCs and start networking. Using this card in conjunction with a WirelessTM WA5001 802.
Applications The Wireless products offer a fast, reliable, cost-effective solution for wireless client access to the network in applications such as: • Remote access to corporate network information E-mail, file transfer, and terminal emulation. • Difficult-to-wire environments Historical or old buildings, asbestos installations, and open areas where wiring is difficult to employ.
Hardware Description The Wireless PC Card is fully compliant with 802.11a wireless networking as defined in IEEE 802.11a. It can be installed in any notebook with a CardBus slot. Support is provided for Windows 98/Me/2000/XP. Hardware Installation 1. Turn your computer on and boot to your operating system. 2. With the CardBus adapter 68-pin connector facing the CardBus slot and the label facing up, slide the card completely into the CardBus slot as shown below.
Driver Installation and Configuration The driver folder on the Driver/Utility CD-ROM contains the software drivers available for the WirelessTM 802.11a PC Card. Windows 98/Me/2000/XP Driver Installation You may find that these instructions do not exactly match your version of Windows. This is because these steps and screenshots were created from Windows 2000. Windows 98, Windows Millennium Edition, and Windows XP are similar, but not identical, to Windows 2000. 1.
Windows 98/Me/2000/XP Driver Installation 2. Insert the Driver/Utility CD-ROM and click “Next.” 3. Click “Next” to copy files from the CD-ROM.
Driver Installation and Configuration 4. Click “Finish” to end the installation. To communicate with the Wireless 802.11a wireless devices, you may need to configure the CardBus Adapter. For Windows 98, see “Windows 98 Configuration” on page 7. For Windows Me/2000/XP see “Windows Me/2000/XP Configuration” on page 8.
Windows 98 Configuration Windows 98 Configuration 1. From the “Start” menu, select “Settings” then click on “Control Panel.” 2. Double-click on the “NIC Configuration” icon. A configuration dialog box similar to the one shown in step 5 on page 11 will appear. For the remaining configuration instructions, go to page 14 and continue from Step 5.
Driver Installation and Configuration Windows Me/2000/XP Configuration 1. 8 On your desktop, right click “My Computer,” click “Properties” then click the “Hardware” tab in the “System Properties” dialog box.
Windows Me/2000/XP Configuration 2. Click “Device Manager.” 3. Click “Network adapters” then click “Wireless 802.11a PC Card.
Driver Installation and Configuration 4. 10 Click the “Settings” tab.
Windows Me/2000/XP Configuration 5. You may either modify the default settings or create a new configuration profile. To modify the default settings, click “Modify.” To create a new configuration profile, click “New.
Driver Installation and Configuration 6. The “Network Configuration Settings” dialog box will open. Configuration Name – Enter the configuration name. Network Name (SSID) – Set the “SSID” (Service Set ID) to the same as that used by the ad hoc workgroup or access point you want to connect to (the Access Point default is “ANY”). Note: The SSID is case sensitive and can consist of up to 32 alphanumeric characters.
Windows Me/2000/XP Configuration 8. Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to your wireless network and provide more secure wireless data transmission. The CardBus supports “Shared Key” encryption with key lengths from standard 64-bit, industry standard 128-bit, to extended 152-bit. In addition to the standard WEP key, a per-station unique key is also supported. All wireless devices must have the same Key ID values to communicate.
Driver Installation and Configuration 9. Click “Modify” in the card properties dialog box (see step 5 on page 11), click the “Security” tab in the “Network Configuration Settings” dialog box, then select “Unique” or one of the shared keys from the drop-down list. Click “OK.” This will return you to the card properties dialog box (see step 5 on page 11). 10. Click “OK” in the card properties dialog box (see step 5 on page 11). 11.
Network Topologies Network Configuration and Planning The wireless solution supports a stand-alone wireless network configuration, as well as an integrated wireless and 10/100 Mbps wired LAN configuration.
Network Configuration and Planning Infrastructure Wireless LAN The AP-2000 PC Card can also provide access to a wired LAN for wireless clients. An integrated wired/wireless LAN is called an infrastructure configuration. A Basic Service Set (BSS) consists of a group of wireless PCs, and an access point that is directly connected to the wired LAN.
Network Topologies Infrastructure Wireless LAN for Roaming Wireless PCs The Basic Service Set (BSS) is the communications domain for each Wireless Access Point. For wireless PCs that do not need to support roaming, set the domain identifier (SSID) for the wireless card to the SSID of the access point to which you want to connect. Check with your administrator for the SSID of the access point to which he wants you to connect. A wireless infrastructure can also support roaming for mobile workers.
Troubleshooting Adapter Installation Problems If your computer cannot find the Wireless CardBus Adapter or the network driver does not install correctly, check the following: • Make sure the adapter is securely seated in the CardBus slot. Check for any hardware problems, such as physical damage to the card’s connector. • Try the card in another CardBus slot. If this also fails, test your computer with another AP-2000 PC Card wireless card that is known to operate correctly.
The 802.11a Wireless Products Maximum Distance Table The 802.11a Wireless Products Maximum Distance Table Important Notice Maximum distances posted below are actual tested distance thresholds. However, there are many variables such as barrier composition and construction, as well as local environmental interference, that may impact actual distances and cause you to experience distance thresholds far lower than those posted below. 802.
Compliances FCC Class B Certification FCC ID: IMRWLPCE508A This device complies with Part 15 of the FCC Rules Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Specifications Functional Criteria Data Rate Normal Mode: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Standards Conformance Operating Range IEEE 802.11a Up to 500 m (1650 ft) Radio Signal Signal Type Operating Frequency Orthogonal Frequency Division Multiplexing (OFDM) 5.15 ~ 5.25 GHz (lower band) for US/Canada, Japan 5.25 ~ 5.
Specifications Modulation 5.15-5.25 GHz (dBm) 5.25-5.35 GHz (dBm) 16 QAM (36 Mbps) 14 16.5 64 QAM (48 Mbps) 11 11 64 QAM (54 Mbps) 7 7 Physical Characteristics Input Voltage Power Consumption 3.3 V Weight Dimensions Antenna LED Indicators Idle/Listening 1478 mW, Power Save Mode 40 mW Base Mode: TX 1657 mW, RX 1247 mW, Idle/Listening 1238 mW, Power Save Mode 40 mW 50 g (4.8 oz) 11.5 x 5.3 cm (4.53 x 2.
Terminology The following is a list of terminology used in this document. Access Point – An internetworking device that seamlessly connects wired and wireless networks. Ad hoc – An ad hoc wireless LAN is a group of computers each with LAN adapters, connected as an independent wireless LAN. Backbone – The core infrastructure of a network. The portion of the network that transports information from one central location to another central location where it is unloaded onto a local system.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Notice: The changes or modifications not expreslly approved by the party responsible for compliance could void the user's authority to operate the equipment.
