User Guide
Table Of Contents
- Table of Contents
- WaveLAN Technical Support
- Regulatory Information
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Antenna
- Index
- List of Figures
- List of Tables
- Warranty Repair Card
Mounting the Antenna
4-10 Outdoor Antenna Installation Guide
Use a wrench to tighten the nuts and ensure the bracket will be
fixed to the top of the mast.
5. Next feed the antenna cable of the 7 dBi omni-directional
antenna (item A) through the hole of the mounting bracket.
6. Slide the antenna down, until its metal base is enclosed by the
mounting bracket as pictured in Figure 4-3.
Figure 4-3 Mounting the 7 dBi Antenna to a Mast
7. Use a wrench to tighten the bracket bolt (item G) to fix the
antenna into its position.
!
CAUTION:
Avoid overtightening the hose-clip nut to avoid damage to
the clip and your antenna.
8. Proceed with “Connecting the Antenna Cable” on page 4-11 to
connect the antenna to the indoor equipment.