User Guide

Mounting the Antenna
4-6 Outdoor Antenna Installation Guide
Mounting the Antenna 4
The WaveACCESS Office Router kit is available as a 2.4 GHz Kit
with either a 14 dBi directional or a 7 dBi omni-directional antenna.
This section includes mounting instructions for each of these
antenna types.
When mounting multiple antennas on a single mast, use the
following methods to minimize the influence of cross-talk
interference between the antennas:
■ Place your antennas as far apart as you can.
■ Alternate the mounting of directional antennas for vertical and
horizontal polarization.
The illustrations on the following pages picture the mounting
instructions for vertical polarization.
Mounting the Directional Antenna 4
You can mount the Lucent Technologies 14 dBi Directional
Antenna to a mast or a flat vertical surface, such as a wall.
In most cases mounting the antenna to a mast will allow for more
flexibility in adjusting the height and direction of the antenna to aim
it at the opposite end of the wireless link.
Mounting to a Mast 4
To mount the antenna to a mast proceed as follows:
1. Verify if you have all the items listed below:
■ The WaveACCESS 2.4 GHz antenna
■ The 2 U-bolts and bolt heads provided
■ The 4 flatwashers and 4 nuts provided
■ A socket wrench to tighten the nuts