User Guide
Table Of Contents
- Table of Contents
- WaveLAN Technical Support
- Regulatory Information
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Antenna
- Index
- List of Figures
- List of Tables
- Warranty Repair Card
Examples
3-16 Outdoor Antenna Installation Guide
Point-to-MultiPoint Links 3
Suppose you are installing a wireless Point-to-Multipoint link
between a WaveCAMPUS Central Office Router and two Remote
Office Routers as pictured in Figure 3-5 below, where:
■ The Central Office Router in building c is connected to a 7 dBi
Omni-Directional Antenna, and
■ The two remote sites a and b have been equipped with a 14
dBi Directional Antenna.
■ All sites have been connected via 22m.(75ft.) antenna cables.
■ The site is located in the Europe, which requires you to use
ETSI approved equipment
1
.
Figure 3-5 Calculating the Point-to-Point Range
For this type of outdoor antenna installation you will need to
determine the range for each link individually, i.e. the range from
the building
c to building a, and from the building c to building b.
1 In France you may only use equipment based on the FR channel-set.