User Guide

Determine the Outdoor Range
3-6 Outdoor Antenna Installation Guide
All values listed in Table 3-1 and Table 3-2 apply to antenna
installations where:
■ Antennas have been mounted for vertical polarization
(being the default mounting method).
■ On both ends of the wireless link the maximum length of the
antenna cable is 6 m./15ft., and
■ The clearance of the signal path (both horizontally and
vertically) is equal or better than the listed value in the grey-
shaded column.
If you are using different cabling lengths and/or the clearance in
your environment is less than the minimum identified in the grey-
shaded columns, you will need to calculate the actual range for
your environment using the formula listed on page 3-2. To do so
please consult:
■ “Determine the Cable Factor” on page 3-8, and/or
■ “Determine the Clearance Factor” on page 3-9.