User Guide

Overview of the Indoor Installation
Outdoor Antenna Installation Guide 2-7
Prior to mounting the WavePOINT-II unit you are advised to,
carefully calculate:
■ The distance between the intended location of your
WavePOINT-II unit and the location of the antenna mast, and
■ The height of the antenna on the mast.
If the low-loss antenna cable that came with your kit is not long
enough to cover this distance you can select from the following two
options:
■ Select another cable length from the Lucent Technologies low-
loss cable offering (see Appendix A ”The Antenna Cabling
System”), or
■ Select another location that satisfies the requirements listed on
the previous page to mount your WavePOINT-II device.
As the length of the antenna cable may affect the actual range of
your outdoor antenna installation, the second one is the preferred
option.
!
WARNING:
You are not allowed to change the length of the Lucent
Technologies low-loss antenna cable. Shortening the cable
will void the Lucent Technologies Warranty, and may
conflict with radio certifications and/or approvals.
How to install the WavePOINT-II hardware is described in the
“WavePOINT-II Quick Installation Guide” that was shipped with the
WavePOINT-II device.