User Guide
Table Of Contents
- Table of Contents
- WaveLAN Technical Support
- Regulatory Information
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Antenna
- Index
- List of Figures
- List of Tables
- Warranty Repair Card
Kit Contents
Outdoor Antenna Installation Guide 1-7
Kit Contents 1
The WaveACCESS Office Router Starter Kit contains the following
items:
■ One WavePOINT-II device, loaded with the dedicated
WaveACCESS Office Router router software (see page 1-8).
■ One WaveACCESS/IEEE Turbo 11 Mb PC Card (see page
1-10).
■ One Cable Assembly (described in Appendix A).
■ One WaveACCESS Surge Arrester (described in Appendix A).
■ One External Antenna for Outdoor use.
The External Antenna may either be:
■ 14 dBi directional Yagi antenna (described in Appendix B).
■ 7 dBi omni-directional antenna (described in Appendix C).
Each of the items is shipped in dedicated boxes to avoid damage
during shipment.
Together with this kit you should have received a Lucent Low-loss
antenna cable (a separately ordered item) which can either be a:
■ 6 m (20 ft.) cable
■ 15 m (50 ft.) cable
■ 22 m (75 ft.) cable
If any of these items is missing, please contact your authorized
WaveLAN/WaveACCESS Reseller or Distributor. You can find the
addresses on the WaveLAN/WaveACCESS website at
http://www.wavelan.com.