User Guide

Introducing WaveACCESS Office Router
1-4 Outdoor Antenna Installation Guide
Appendix A “The Antenna Cabling System” 1
Describes the hardware specifications of the certified
WaveACCESS Cable Assembly, Surge Arrester and Low-loss
Antenna Cable that you will need to connect the WavePOINT-II
hardware or other computing device to an outdoor antenna
installation.
Appendix B “14 dBi Directional Antenna” 1
Describes the hardware specifications of this antenna that you can
use to set up long-distance point-to-point antenna links.
Appendix C “7 dBi Omni-Directional Antenna” 1
Describes the hardware specifications of this antenna that you can
use to set up wide-range antenna links.
Finding Additional Information 1
Installing WavePOINT-II Hardware 1
WaveACCESS outdoor antenna installations are typically
connected to WavePOINT-II devices. The hardware installation of
these devices is described in the WavePOINT-II Quick Installation
Guide that is included with each WavePOINT-II unit.
Configuration and Management 1
The configuration and management of outdoor antenna links is
controlled via the WaveMANAGER/OR (Office Router) program; an
MS-Windows based application that can be installed on almost any
computer running Windows 95, 98 or Windows NT (v4.0).
How to install this program is described in the WavePOINT-II Quick
Installation Guide that is included with each WavePOINT-II unit.