User Guide
Table Of Contents
- Table of Contents
- WaveLAN Technical Support
- Regulatory Information
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Antenna
- Index
- List of Figures
- List of Tables
- Warranty Repair Card
Introducing WaveACCESS Office Router
Outdoor Antenna Installation Guide 1-3
installation service. The site pre-requisites have to be
checked by a person familiar with the national electrical
code, and other regulations governing this type of
installation.
Overview of this Guide 1
This User’s Guide describes how to extend a Local Area Network
(LAN) system with an outdoor antenna link. In this manual you will
find information that you will need to prepare or verify the antenna
installation.
Chapter 1 “Welcome” (This Chapter) 1
Introduces the Outdoor Kit and describes where you can find the
information you need to set up a wireless system.
Chapter 2 “Preparing for Installation” 1
Describes the requirements that a site must meet before you start
installing the equipment.
Chapter 3 “Determine Range & Clearance” 1
Describes the how to calculate the typical and/or maximum
distance that you can achieve using WaveACCESS Office Router
products.
Chapter 4 “Installing the Antenna” 1
Describes how to mount the Lucent Technologies antennas to a
mast or wall, and how to connect the antenna to the cable and
Surge Arrester.