User's Manual

24 dBi Directional Parabolic Grid Antenna
Hardware Specifications
F-2 ORiNOCO Outdoor Antenna Installation Guide
Kit Contents
The 24 dBi Directional Parabolic Grid Antenna comes in two boxes with the
following contents:
NOTE:
Prior to installation, or climbing the roof, verify if all parts and
components are included. If any part is missing or appears to be
damaged, please consult your authorized Lucent Technologies Reseller.
Assembling the Antenna
1. Assemble the two halves inserting the 4 #8-32 machine screws through the
front. Secure with the keps nuts on the back.
NOTE:
Loosely tighten all hardware until completely assembled and then
tighten securely.
PACKED IN FEED BOX: PACKED IN REFLECTOR BOX
■ 1 Feed assembly
■ 1 Sub-reflector
■ 1 #6 x 1/2” stainless screw
■ 2 Stainless 1/4 x 20 hex nuts
■ 2 Stainless lock washers
■ 2 Stainless carriage bolts
■ 2 Reflector halves
■ 2 Stainless U-bolts
■ 2 Mast clamps
■ 1 Mounting “L” shaped bracket
■ 4 Keps nuts (4) #8-32 machine screws
■ 6 Stainless 1/4 x 20 hex nuts
■ 6 Stainless lock washers
■ 2 Stainless carriage bolts
■ 1 Stainless flat plate washer