User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
Welcome
About ORiNOCO Outdoor Router
ORiNOCO Outdoor Antenna Installation Guide 1-5
ORiNOCO Central Outdoor Router
If you wish to connect more than two buildings, you can choose to:
■ Setup multiple Point-to-Point links, using multiple pairs of Remote Outdoor
Router systems, or
■ Setup a single Point-to-Multipoint system using a single Central Outdoor
Router and multiple Remote Outdoor Routers as pictured in Figure 1-2
below.
Figure 1-2 ORiNOCO Point-to-Multipoint Link
Looking at Figure 1-2 the system is designed as follows:
■ The central building c is equipped with the Central Outdoor Router,
connected to either an omni-directional, or wide angle antenna.
■ The two Remote buildings a and b have both been equipped with Remote
Outdoor Routers connected to directional antennas.
NOTE:
Subject to local radio regulations and legislation, the outdoor antenna
solutions described in this document may not be available in all parts of
the world. Consult Appendix G “Certified Outdoor Solutions” for more
information.