User's Manual
Table Of Contents
- Contents
- 1 Introduction to AirPort5
- 2 Setting Up Your AirPort Base Station9
- 3 Using Your AirPort Base Station15
- Monitoring the AirPort Base Station’s InternetConnectionStatus15
- Monitoring AirPort Base Station Communication16
- Connecting to the Internet16
- Disconnecting From the Internet17
- Connecting Additional Computers to Your AirPort Network17
- Configuring the AirPort Base Station With the AirPortAdminUtility17
- More Information About AirPort18
- 4 Troubleshooting19
- Appendix AirPort Base Station Specifications23
- Introduction to AirPort
- Setting Up Your AirPort Base Station
- Using Your AirPort Base Station
- Monitoring the AirPort Base Station’s InternetConnectionStatus
- Monitoring AirPort Base Station Communication
- Connecting to the Internet
- Disconnecting From the Internet
- Connecting Additional Computers to Your AirPort Network
- Configuring the AirPort Base Station With the AirPortAdminUtility
- More Information About AirPort
- Troubleshooting
- Communications Regulation Information
Setting Up Your AirPort Base Station
13
If you are setting up your base station for the first time and you do not see an option to set
up a base station:
1
Quit the AirPort Setup Assistant by choosing Quit from the File menu.
2
Make sure that you have plugged in your base station and that the middle light glows green.
3
Open the AirPort Setup Assistant again and follow the instructions to set up your computer
and the AirPort Base Station.
At the end of the setup assistant, you can connect to the Internet.
Mounting the AirPort Base Station on a Wall
You can use the mounting bracket provided with your AirPort Base Station to mount it on a
wall. Follow these steps:
1
Select a location close to power and phone outlets (or a network connection).
2
Screw the mounting bracket into a wall stud using the two screws that came with the
base station.
Mounting bracket
LL1017.Book Page 13 Wednesday, September 19, 2001 1:11 PM