User's Manual

Quick Installation Guide B-3
DRAFT - Agere #3: 05/14/2002
Compaq CONFIDENTIAL—For Internal Use Only
14 May 2002
File: CMPQ_MM_B.fm
For more information consult the Compaq Wireless LAN
MultiPort W200 User’s Guide provided on the CD-ROM.
Windows 98 SE & Windows
2000 Professional:
The Client Manager icon
does not appear in the
system tray.
• Make sure the Wireless LAN MultiPort
W200 is seated correctly. Refer to Chapter
2 for instructions.
• Make sure the Wireless LAN MultiPort
W200 status light is solid or flashing green.
If you are using a notebook computer and
the Wireless LAN MultiPort W200 status
light is not on, press
Fn+F2 to enable the
Wireless LAN MultiPort W200.
• Make sure the drivers are installed. Select
Start > Settings > Control Panel >
Network and see if the Compaq Wireless
LAN MultiPort W200 is listed as a network
adapter.
• Refer to Chapter 2 for more information.
• The wireless LAN software may not be
installed. Refer to Chapter 2 for more
information.
Windows 98 SE & Windows
2000 Professional:
The Client Manager icon in
the system tray is always
red.
• Make sure your computer and each network
client to which you are trying to connect
have the same Network Name (SSID). The
Network Name is case sensitive.
• Make sure your WEP settings are correct.
• Make sure you are within range of an
access point or network client.
Solving Problems (Continued)
Problem Solution