Instructions

Use the device in a location where it is not exposed to direct sunlight.
Do not put the device in a row.
IP20 - use only in dry rooms.
Power supply connection
Only connect the mains plug to a properly installed, easily accessible
100-240 V ~ 50/60 Hz power socket. The power socket must still be easily
accessible after connection.
Unplug the device from the power socket during storms.
DANGER! Never open the casing of the device; it contains no parts requiring maintenance!
When the casing is open, there is danger of death from electric shock.
Faults
In the event of damage to the device, immediately unplug the device from
the power socket.
Do not use the device if there is visible damage to the casing or the mains
plug. Repairs to the device must be performed exclusively by the service
centre in order to avoid danger.
DANGER! If liquid or foreign bodies get into the device, immediately deactivate the corresponding fuse
and then disconnect the device from the power supply. Have the device checked before operating it again.
Type-C/USB connection
When removing the Type_C/USB device, the device must be switched o,
otherwise data loss or damage to the USB device or the power socket radio
may occur.