Manualshelf

Installation Sheet

ManualsBrandsAgeless Iron ManualsHardware78-3/4" Long Sliding Door / Barn Door Hardware Track and Fitting Set with Grip and Flush Pulls
123456
For assistance, call 1-800-522-7336 Mon–Fri 7:00 AM – 4:00 PM MT
or visit www.AgelessIronHardware.com/support
6
DOOR STOP ADJUSTMENT
1. Slide the door to the left until it covers the door opening, and overlaps the door trim
an inch on both sides.
2. Slide the door stop next to the roller strap, tighten the two hex screws.
3. On the opposite end of the track, slide the door to the right gently until the door
opening is fully revealed. Slide the door stop until the rubber bumpers touch the roller
strap. Tighten the two hex screws.
4. Check operation, and make further adjustments as necessary.
DOOR STOP
PK315BD