Installation Sheet

For assistance, call 1-800-522-7336 Mon–Fri 7:00 AM – 4:00 PM MT

or visit www.AgelessIronHardware.com/support

HANGING THE DOOR

1. Mount the door stops 3” from each end of the track, with

rubber bumpers inward. Tighten the hex screws.

2. Lift the door onto the track. Be certain that the track goes

into the groove on the track roller.

3. Gently roll the door back and forth.

4. Rotate the track protectors so they do not

overhang the door on either side.

5. Tighten the screws.

PK315BD