Installation Sheet

For assistance, call 1-800-522-7336 Mon–Fri 7:00 AM – 4:00 PM MT
or visit www.AgelessIronHardware.com/support
3
ROLLER INSTALLATION
1. Mark both upper corners of the door per the drawing below.
2. Drill through the door with a 3/8 ” drill.
3. Attach the roller to the door using provided bolts and washers.
(Use 2
3/8
” for 1
3/8
” doors; 2
5/8
” for 1
3/4
” doors).
4. Hold roller strap parallel with the door edge, and tighten the nuts.
Ø 3/8”
1
9/16
”
3
9/16
”
(A) For visual purposes, it is
normal for this distance to
be one-half of the width
of the vertical stile on the
door. If no stile is present,
measure 2
1/2
” in.
PK315BD