User Manual

TRAFFIC INFORMATION AND MEASUREMENT EQUIPMENT
AGD933 User Manual Issue 2 3 of 4 17/03/09
Copyright AGD Systems Ltd. 2009. All rights reserved. The information contained in this document is the property of AGD Systems Ltd., and is supplied without liability
for errors or omissions.
1. INTRODUCTION
This manual details the use of the AGD933 Enforcement Radar Certification Equipment. Used with
AGD radars, the AGD933 allows the user to determine the performance of relevant radars during their
calibration period against known parameters by non-invasive methods (calibration seals do not need to
be removed).
The immediate application of the AGD933 equipment is for AGD340 and AGD330 radars.
The AGD933 incorporates a laboratory version of the AGD932 target simulator hardware which is
controlled via a separate PC and bespoke AGD software.
1.1 Document Scope
This document is a statement of the product design and is generated in response to the Marketing
Requirement Specification. The document will be reviewed and authorised as part of the BS EN ISO
9001 design process detailed in DWI/00.
1.2 Document Change History
Issue Amendment Details Date of Issue By
1
Introduction
12/03/09 RF
2
Addition of Changes or modification note
17/03/09
RF
1.3 Important Information
THE AGD933 NOR USE OF THE BESPOKE SOFTWARE DOES NOT/NOR IS IT INTENDED TO
REPLACE NOR CONFIRM THE FORMAL CALIBRATION OF THE RADAR BY AUTHORISED
BODIES.
IT IS INTENDED AS AN INDICATION ONLY AS TO THE RADARS CURRENT PERFORMANCE
AGAINST KNOWN PARAMETERS
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT, NOT EXPRESSLY APPROVED BY AGD
SYSTEMS LTD, MAY VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT