Product Manual

8
s
DIRECTION OF TRAVEL
s
DIRECTION OF TRAVEL
Pole
Pole
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
PHYSICAL INSTALLATION
343 Mounting Bracket Kit
The AGD 343 bracket mounting kit (part number MS-246) consists of two brackets and all the required fixing
hardware.
BR-270 is the component of the bracket kit that BR-271 is the component of the bracket kit that
fits to the structure you are mounting to. fits to the rear of the radar.
Fixing hardware consists of:
7no. M5 x 10mm Torx T20 A2 Stainless Screws
7no. M5 External Shakeproof A2 Stainless Washers
Step 1 – Mount bracket to the pole
Installation
Attach BR-270 to the structure you are mounting too
using mounting straps (AGD recommends stainless
steel sign banding ½” thick).
The position of the bracket should be parallel to the
carriageway as in the image below, le. Do not install
the bracket as shown in the right hand image.