Product Manual

10
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
AGD 343
HIGHWAYS MONITORING RADAR
CONNECTIONS
Pin No. Associated wire colour Function Additional Notes
1 White GND (0v)
2 Brown GND (0v)
3 Yellow Y (TX-)
4 Green Z (TX+)
5 Grey B (RX-)
6 Pink A (RX+)
7 Blue Vin
8 Red Vin
5
8
6 4
7 3
1 2
ELECTRICAL INSTALLATION
The detector is powered using a 24Vdc supply. The power is applied to the detector using the multi-pin mating
connector.
The product mating connector is shown above and is located on the bottom of the product.
343 Power/RS422 Cable Assembly
The cable assembly to connect power and comms to the radar is Part Number CA-310. This cable is supplied in
a 10m length and is shown below:
CA-310 has the same attributes as shown in the Connections table above.
Installation