Specifications

WING PLOW GUIDANCE LASER
The GL3000PMC Guidance Laser uses
an “ultra-bright” green laser spot
to establish wing plow trailing edge
location before you get there.
The laser spot impacts on the road/
snow surface ahead of the truck and
shows the driver where the wing
plow trailing edge will be. The laser
reference spot is on the road and in
the driver’s normal field of view.
The GL3000PMC laser is electronical-
ly designed for cold weather opera-
tion. This laser is coupled to a special
heat source for the exit window to
reduce or eliminate ice build-up on
the front of the laser output lens.
The GL3000PMC also has a unique
pneumatic snow removal system
incorporated with the laser housing
that automatically fires a blast of air
at the front of the laser lens every 5
seconds. This removes snow build-up
from the laser output lens.
The GL3000PMC is a class IIIA ultra
bright green laser with 5mW of power.
Green is most visible to the eye in all
working conditions. The GL3000PMC
laser is U.S. CFR 21-1040 and Canadian
IEC 60825 compliant. The GL3000PMC
meets all federal U.S. OSHA and Ca-
nadian CCOS standards for operation.
The laser housing is weatherproof,
and hermetically sealed and dry
nitrogen charged for operation
in virtually any weather condition.
The systems work directly off the
12 volt side of the truck, and will
operate from 11 to 15 volts DC with
positive or negative ground.
SPEC IFICATIONS
Laser: 532 NM Class IIIA Green Laser
Power: 11-15V DC Positive or Negative Ground
Power Draw: 4.0 Amps (Maximum Operating),
0.03 Amps (Sleep Mode)
Operating Temperature: -40˚F to +122˚F
(-40˚C to +50˚C)
Pneumatic: 120 PSI / 12V DC Operation
Laser Dimensions:
Height: 6
3
/8 Inches
Length: 7
7
/8 Inches
Width (At Widest Point): 4
1
/4 Inches
Cable Length from Laser to Control Box:
20 Feet
12V Power Cable Length from Control Box:
5 Feet
Pneumatic Hose Length
(Laser to Air Source): 20 Feet
Shipping Weight: 25 Lbs.
THE PRODUCT
THE SYSTEM
Reduces plow and property damage • Reduces downtime for plow repair
Less strain on the operator • Safer
The GL3000PMC is a versatile all weather product that can also be used for
guiding highway paint stripers, asphalt distributors, pavement profilers, or
virtually any other vehicle or equipment requiring line control. Use it in the
winter and summer for all your guidance needs.
GL3000PMC Guidance Laser mounted
under headache rack
Laser spot showing future path of trailing edge GL3000PMC “ultra-bright” green laser shown
Patent Pending
M A I N H O U S I N G
Weatherproof, containing optic plate
mounting platform, micro processor
electronics, laser, laser mounting
assembly, laser driver board, automatic
cooling and heating system, front
window is automatically heated to
reduce or eliminate icing.
P N E U M AT I C A I R B L A S T M O D U L E
Removes snow build up from laser
exit window with automatic air blast
every 5 seconds.
C O N T RO L PA N E L I N C A B
Allows the operator to turn the laser
on and off as well as the deicing and
automatic air blast functions.
20 FEET OF INTERCONNECT CABLE
With waterproof mil spec in-line
connector mounted between the
laser main housing and the control
panel mounted in the cab.
5 F E E T O F 12V D C C A B L E
Running from control box for con-
nection to vehicle’s 12V DC power.
20 F E E T O F 1/4 -I N C H
P N E U M AT I C H OS E L I N E
Complete with connectors for tying
into vehicle’s secondary air source.
DISTRIBUTED BY:
41