User manual

[e-mail] Page | 43 1-800-930-0949
Scheduler – The scheduler allows you to set certain time periods when you would like motion to be
detected. You can use the scheduler to set times for all 7 days of the week, 24 hours a day. Each
rectangular block in the schedule represents 15 minutes. You can use this system to specify when you
would like to enable motion detection and keep it disabled.
You have the option of not checking scheduler. If you uncheck scheduler, motion detection will be
activated at all times, as long as motion detection is armed.
Clicking the number (that corresponds to the hour) at the top of each column will set motion detection for
that specific hour during the entire week. You can also clear the zones by clicking the number below the
top number.
For example, in the screenshot above you can see that during the entire week, at 3:00 AM – 4:00 AM,
and from 5:00 AM – 6:00 AM, motion detection will be activated. At all other hours during the week,
motion detection will be deactivated.
You can click “Set All” at the top of the scheduler to set motion detection to all the zones easily. You can
also use the button “Clear All” to clear the entire board of any activated zones.
Be sure to click “Submit” when you are finished setting all motion detection settings.