User manual

[e-mail] Page | 36 1-800-930-0949
This page allows you to choose the DDNS service, and then requires you to enter the username and
password for the service you are using, along with your hostname.
For example, in the following screenshot we are using the information from our No-IP DNS account:
To receive a free DNS hostname, try using the DynDNS Trial Account at http://dyn.com/dns/dyndns-pro-
free-trial/ or the No-IP free hostname at http://www.no-ip.com/newUser.php.
When you create your account, remember to write down your username, password, and the host that you
have set up for your account.
Our host in this case was foscamusa1.no-ip.org. An example of a DynDNS host would be
foscamusa1.dyndns.org.
Once the DDNS settings are configured properly, head to the Device Status page to see if the DDNS
status is correctly set up.
Above you can see that under the “DDNS Status” field, we see “No-IP Succeed” with the hostname
afterwards. This indicates that DDNS was set up properly. You can now access the camera using the
hostname URL listed. In our case, this is http://foscamusa1.no-ip.org:8910
Note that you will always need to add the port number with a colon after the initial hostname to point to
your specific camera.