User manual

[e-mail] Page | 27 1-800-930-0949
On the User Settings page you can also set the location you would like video recordings to save. You
can set the path for manual recordings, which is the option named “Set Record Path.” You can set the
path for alarm recordings as well if you would like to a separate path, using the “Set AlarmRecord Path”
option. Click “Browse” to choose the folder you would like to save recordings to. Note that you need to
keep each camera open in a separate browser window to save recordings, even for alarm recordings.
If you receive an error such as “Set the record path fail” when you try to select a path to save
recordings, try configuring the following:
Navigate to Tools, then Internet Options. Click on the Privacy tab at the top, then click “Sites.” You will
need to add the camera as a trusted site. Insert the URL (IP address of the camera) in the trusted sites
field and click “Allow” to add it. Push OK and Apply, then restart your browser.
If you still have problems, navigate to Internet Options again, then under the “Security” tab, try
unchecking the box which reads “Enable Protected Mode.” Click Apply, then OK, then try restarting the
browser, logging into the camera, and setting the path again.