User manual

[e-mail] Page | 23 1-800-930-0949
Mode – There are three modes you can choose from, 50 HZ, 60 HZ, and Outdoor. Usually the differences
for 50HZ and 60HZ depend on which country you reside in. In the United States, 60HZ is usually used.
Sometimes you may experience a flicker in your camera, try switching the mode to another value to see if
the flicker disappears. 50HZ is usually used in the UK. If using the camera for outdoor viewing, choose
the Outdoor setting, you may need to also reboot the camera is selecting this setting.
Brightness / Contrast – These values are used to adjust the quality of the video, you can choose to
make the camera video darker or lighter depending on your preference.
Preset – You can set a pre-defined location with this feature. Once you have determined a location that
you would like to set as a preset, click the “Set” button after choosing which preset you would like to save
to (you can choose from 1 – 8). If you need to call a preset, choose the saved preset from the drop down
box and click “Go.” The camera will automatically pan and tilt to the saved preset. Make sure presets are
enabled by going to “For Administrator” and clicking on “PTZ Settings.” Make sure the “disable preset”
box is not checked.
For Firefox, Chrome, and Safari:
A few of the above features are not available in push browsers like Firefox, Chrome, or Safari.
In these browsers however you are able to take snapshots of the live video feed and also use one-way
audio by listening to the audio in the location of the camera. For Mac users, we recommend “uFoscam”
and “IP Camera Viewer” from the Mac App store to use the above features in a standalone program.