User manual

[e-mail] Page | 22 1-800-930-0949
5.5 – For Operator
For Internet Explorer
Figure 5.13 – Options under the Operator heading
Pan/Tilt Circle – Use this circular feature to pan and tilt the camera. You can click the blue area in the
center of the circle to center the camera to its default position.
- These buttons are used to cruise the camera either up and down, or side to side, as you can
see from the icons. The first icon with arrows pointing up and down will tilt the camera to its maximum
degree upwards and downwards. The second button will cruise the camera to its maximum degree from
side to side. Use the stop buttons next to these icons to stop the cruise. The camera will only cruise once.
- These icons turn the IR LEDs on or off, for night vision. The first button is used to turn the IR
LEDs on. This will illuminate the camera’s video at night initially, and the picture should be in black and
white in complete darkness. The second button turns off the IR LEDs, turning off all night vision
completely. Having the IR LEDs on automatically allows the camera to turn the night vision on when
darkness is detected. If the second icon is clicked, the camera will never switch into night vision.
Flip – This option flips the video feed upside-down. Useful if you are mounting the camera upside-down
from the ceiling.
Mirror – This option flips the video feed horizontally. This is also useful if you are mounting the camera
upside-down, having this option and the flip option checked will give you a normal view when your
camera is mounted upside-down from the ceiling.