Specifications

46
WARNING: Your healthcare professional should recommend
what your hyperglycaemic limit is.
[1] When your meter is deactivated, press the CHECK (
) but-
ton once to enter menu mode. The word “MEM” is displayed.
[2] Press the DOWN (
) or UP ( ) arrow buttons
until the abbreviation “HYPER” is displayed.
[3] Press the CHECK (
) button to enter and edit
the Hyperglycaemic Warning Alarm settings.
[4] Set the Hyperglycaemic Alarm ON or OFF
with the DOWN (
) or UP ( ) arrow buttons.
Your selection will be highlighted by the
blinking of the symbol. Press the CHECK (
)
button to confirm your selection and move
on to the hyperglycaemic threshold setting.
[5] Set the hyperglycaemic threshold (flashing)
with the DOWN (
) or UP ( ) arrow buttons. Press the CHECK
(
) button to confirm your selection and return to the menu.
The Hyperglycaemic Warning Alarm alerts you when your glucose
test results are above the hyperglycaemic threshold you have set.
The meter is pre-set to a hyperglycaemic threshold of 13.3 mmol/L.
Always consult your healthcare professional for your recommend-
ed target ranges. When your glucose test results are above your
set hyperglycaemic threshold, the meter display will flash your
test results, the abbreviation “HYPr,” time, and date repeatedly.
Setting Hyperglycaemic
Warning Alarms
16
CHAPTER