Specifications

43
[1] When your meter is deactivated, press the CHECK ( )
button once to enter menu mode. The word “MEM” is
displayed.
[2] Press the DOWN (
) or UP ( ) arrow buttons
until the word “DATE” is displayed. Press the
CHECK (
) button to enter and edit the date
settings.
[3] You should see a display with the message blinking “M-d”
DOWN (
) or UP ( ) arrow buttons. The 12 hour
clock display option is indicated by a 12hr. The 24
hour clock display option is indicated by a 24hr.
Your selection will be highlighted by the blink-
ing of the symbol. Press the CHECK (
) button
to confirm your selection and continue on to the
hour setting.
[4] Set the hour (flashing) with the DOWN (
) or
UP (
) arrow buttons. Press the CHECK ( ) but-
ton to confirm your selection and continue on to
the minute setting.
[5] Set the minute (flashing) with the DOWN (
)
or UP (
) arrow buttons. Press the CHECK ( ) but-
ton to confirm and return to the menu.
Setting the Date
14
CHAPTER