User`s manual

Power:

Power button.

Home:

Locate the recharging dock to charge the battery. Not available in "Max" mode.

Stop:

Stop cleaning.

Spot:

Activate "Spot Cleaning" mode (run Spiral mode in a specifi c area).

Clean:

Start cleaning. Press the “Clean button” for 3~5 seconds and it will be shown on the

remote display. You can switch to the clean mode to perform cleaning after you hear a

“beeping” sound. The display of the remote control will automatically switch to clock

mode 30 seconds later. In this case, the buttons on the remote control can function

properly.

Random Wander mode

Along Wall mode - Cleaning along walls or furniture

"S" Shape mode - Cleaning rectangular areas (keep away from stairs)

Polygonal mode - Clean a specifi c area

Spiral mode - Clean a specifi c area (keep away from the stairs)

Max:

Instruct Eclean to clean until the battery runs out (consumes the most power)."Home"

mode can not be used in conjunction with this mode.

Plan:

Activate cleaning plan and setup mode. You can designate the desired cleaning time in

a week.

Clock:

Enter Clock Setting mode to set the current time (week / hour / minute). After fi

nishing setting, press “Enter” button. When the clock setting is properly completed on

Eclean, three beeps shall be heard.

Area:

Set the cleaning area. (EC02 does not support this function)

Note:

In PLAN and its CLOCK Setting mode, other function buttons cannot work.