Operating instructions

Fig.12

GLASS

1. How to clean:

The glass will clean itself when there is sufficient

heat generated by burning fuel. If a build-up of cre-

osote occurs on the glass it may be due to draft con-

ditions, poor quality fuel or very slow burning for

along time. Only clean glass when the stove is thor-

oughly cooled. Clean with a liquid detergent taking

care not to scratch the glass with any coal ash

deposits.

2. Glass Replacement: (See Fig.12)

a. Open the door fully.

b. Remove the four corner screws and clips and

carefully remove the broken glass.

c. Clean the glass recess in the door.

d. Attach adhesive thermal tape to the perimeter of

the replacement glass.

e. Place the thermal tape side of the glass into the

door recess and replace the four corner clips.

f. Tighten screws.

g. Replace glass only with ceramic glass 5mm thick.

SUMMER SHUTDOWN

For summer shutdown of the stove, ensure all

ashes have been cleaned from the ash com-

partment and that the air control is fully open, to

avoid condensation in the stove firebox and

possible corrosion during this shutdown period.