Marvel 6SBAR Beverage Center Installation Operation & Maintenance Instructions Part of AGA Foodservice Group
Inspection Remove Packaging Your beverage center has been packed for shipment with all parts that could be damaged by movement securely fastened. Before using, be sure all packing materials and tape have been removed. Important Keep your carton packaging until your beverage center has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit.
Grounding Method: This product is factory equipped with a power supply cord that has a threepronged grounded plug. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances (see figure 1).
How to Clean and Maintain Your beverage center Using the 5/16” hex-head driver, resecure the two hex-head screws back into their original positions to fasten the light tube housing assembly to the top of the cabinet. Condenser: The condenser tubing inside the cabinet does not require frequent cleaning; however, satisfactory cooling depends on adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet.
Roll-out Shelves: The roll-out shelves may be pulled out approximately 14 inches to facilitate product loading and retrieval. Do not lean on or press down heavily on the shelves, doing so may damage the shelves or their content. Pull out shelves gently to minimize any possible item shifting. To maintain stability, avoid pulling out more than one shelf at any time. The roll-out shelves are equipped with a removable center section that allows you to customize the storage capability of your beverage center.
If You Do Need Service How to Obtain Service In the event that you do need service, be sure to report the model number, serial number and proof of purchase to your service representative. Model number and serial number are found on the serial plate which is located on the lower front cabinet flange. For your convenience you may want to record the following information for your records.
Marvel Household Refrigeration Products Limited Warranty Entire Product - Limited One Year Parts and Labor Warranty. MARVEL warrants that it will supply all necessary parts and labor to repair or replace in the end user's home or office, any component which proves to be defective in materials or workmanship, subject to the condition and exclusions stated below, for period of one year from date of purchase by the end user. Additional Second Through Fifth Year Limited Parts Only Warranty.
W W W. M A RV E L I N D U S T R I E S . C O M Phone: (765) 962-2521 Fax: (765) 962-2493 Marvel Industries Part of AGA Foodservice Group 233 Industrial Parkway P.O.
