User guide

The AIMS Controller handset has four display screens:

1. The Information (main menu) screen

2. The Date/Time setting screen

3. The AIMS Programme Screen

4. The Holiday Setting Screen

See each section for details:

The AIMS has one or two programmable events:

The two events programme will enable the AGA to be at ‘Normal’ in the morning, (ie to cook

breakfast) drop to a lower temperature during the day, and return to ‘Normal’ temperature in the

evening (ie: to cook dinner) and drop to ‘Slumber’ later in the evening and throughout the night.

The one event programme willenable the AGA to drop to ‘Slumber’ during the night and return

to ‘Normal’ throughout the day.

This will be shown as Once or Twice on the AIMS programme screen. (See Fig. 22).

The ‘Normal’ temperature for those two events is set beforehand using the cooker thermostat,

see AIMS set-up.

The modes in between the events can be set at ‘Low’ or ‘Slumber’ depending on personal

preference.

If a mistake is made when setting the date or time on any of the screens, use the back button

to go back to the previous setting.

The phone button can be used to store a useful phone number.

Press the button to activate.

Press the button to move between settings.

Press + or - to alter letter/number.

Press the button to confirm setting.

Once the name and number have been set, scroll to end of the number until the display goes

back to the information screen (using the button).

Press again to confirm name and number have been entered.

SELECTING HANDSET LANGUAGE

Language options are selected during the Handset to Base Unit Signal Check/Language

Selection Procedure, see page 17.

Fig. 19 DESN 515485