Technical data

SPECIFICATIONS - 3 OVEN AGA WITH MODULE (GC3M)
8
FIG. 2A DESN 512430
COOKER DIMENSIONS
When surveying for a cooker installation the actual clearance required for the ‘body’ of the
appliance should be increased overall by 10mm beyond the figures quoted below. This allows
safe margin to take into account the natural dimensional variations found in major castings. In
particular the width across the appliance recess could be critical.
* POSITION FOR GAS SUPPLY PIPE TO MODULE
** WHEN ADJACENT TO COMBUSTIBLE MATERIAL
ABCDEFGHJKLMNPSTUW
mm 159 8 889 851 679 467 1035 41 1330 756 1125 73 39 3 698 1533 800 60 116