Manualshelf

Owner's Manual

ManualsBrandsAGA ManualsAGA RangesATC3PWT AGA Total Control 3 Electric Range Cooker with Cast Iron Radiant Heat Oven - Pewter
11121314151617181920
AUTO/EVENTS PROGRAM SCREEN
Stand-by icon will appear if in Preview Mode.
‘T
wice’ will be shown if two events are set.
‘O
nce’ will be shown if one event is set.
‘N
o’ will be shown if no events are set.
1
2
3
4
5
6
This screen is opened by pressing the 7-day event button .
In this screen, the number of events and the start and end time of events can be set. Each day can have a different number of events, and
start and end times, or all seven days can be the same.
There are pre-set times already programmed, to change to your desired settings follow these instructions. Pre-set times are 1 event 7am -
7pm (7 days).
What you can do
1
The current day is shown on the display, this can be
changed to the day that you wish to edit by pressing
the and buttons.
2
This shows the number of events in that day.
This can be changed from no, once or twice by pressing
the and buttons.
3
This shows the start time of the first event. This can be
changed by pressing the and buttons.
4
This shows the end time of the first event. This can be
changed by pressing the and buttons.
5
This shows the start time of the second event. This can
be changed by pressing the and buttons.
6
This shows the end time of the second event. This can
be changed by pressing the and buttons.
How you do it
Press the or buttons to navigate through the
settings on the screen. When a setting is selected
it will be highlighted by a dark box. Pressing the
and buttons. will change the information in
this highlighted box.
Press to copy program settings to next day.
If you have made changes and wish to exit this screen,
press the button. A ‘Save Changes’ - Yes or No?
message will appear on the screen.
Pressing the and buttons will highlight Yes or No.
Press the button again to confirm your choice.
R
EMEMBER: After setting the Auto event that an oven
selection must be chosen on the touch panel if you wish to
activate the program you have just entered.
Notes
• Even if no changes are made a press of the
button is still required, to return to the Home screen.
13