Use and Care Guide

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
32
ArtNo.063-0019 - 90 - SC - Aga Professional - Removing the door
Fitting the oven handle
The handle is supplied as a handle assembly, 2 grub screws
(supplied tted to handle assembly) and an Allen key.
Fit the assembled handle to the projecting mounting studs
on the upper oven door and x it in place by tightening the
grub screws (Fig. 11.3).
Moving the range
On no account try and move the range while it is
plugged into the electricity supply.
This appliance is heavy. Ensure you have the correct
facilities to complete the move. To nd the weight of
the appliance, refer to the “Technical data”.
We recommend two people maneuver the range. Ensure that
the oor covering is rmly attached or removed to prevent it
being disturbed when moving the range around.
To help you, there are two leveling rollers at the back, and
two screw-down levelling feet at the front.
Removing the oven door
To remove the door, open the door fully. Swivel the locking ‘U’
clips forward to the locking position (Fig. 11.4). Grip the sides
of the door, lift upwards and then slide the door forwards
(Fig. 11.5) and remove.
Fig. 11.5
Fig. 11.3
Fig. 11.4