User and Care Manual

26
INSTALLATION
Check the appliance is electrically safe when you have nished.
Checking the Parts:
Flue Flue Vent
Fan Assembly Control knobs x 9
Fitting the Knobs
1. Gently push-t the control knobs onto the spindles.
Fitting the Flue
1. Remove the four screws from the broiler ue opening
(Fig. 9.1).
2. Present the removable ue up to broiler ue opening.
Make sure that the bottom ange of the removable ue
ts inside the xed ue, secure in place with the four
screws (Fig. 9.1 and Fig. 9.2).
3. Once the ue is tted, using the two screws supplied,
secure the bottom of the ue (Fig. 9.2).
Fitting the Flue Vent
1. Loosen the three screws in the back of the hotplate (Fig.
9.3).
2. Fit the ue vent over the screws and slide down (Fig.
9.3). Tighten the screws to secure.
9. Fitting the Flue, Flue Vent and Side Panels
Fig. 9.1
Fig. 9.2
Fig. 9.3
Flue