Use and Care Guide

17
Grill pan
Grill tray
Telescopic rail
Telescopic rail
ArtNo.331-0005 Removing the grill rail
1 2 3
Glide-out broiler™
n
Before you remove any of the broiler parts for
cleaning, make sure that they are cool, or use oven
gloves.
Wash the broiler pan, trivet and broiler tray in hot soapy
water. Alternatively, wash the broiler pan in a dishwasher.
After broilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
1. To remove the broiler pan, pull the tray assembly
forwards (Fig. 6.5) and then lift the broiler pan clear of
the broiler tray assembly (Fig. 6.6).
2. For safety, push the broiler tray back into the broiler
chamber.
3. If you need to remove the telescopic runners to allow
cleaning of the broiler chamber, rst remove the
broiler tray then you can unhook them from the broiler
chamber sides (Fig. 6.7).
4. Wipe the sides clean with a soft cloth and mild
detergent.
n
DO NOT put the side runners in a dishwasher.
5. Once you have nished, hook the side rails back onto
the sides of the chamber. Pull the telescopic rails out
and t the broiler tray onto them, making sure to locate
the cut-outs onto the telescopic runner tabs (Fig. 6.8).
6. Replace the broiler pan.
Oven shelf supports
The shelf supports on the oven sides can be removed for
cleaning.
Removing the oven shelf supports
Remove the oven shelves: Pull the top of the shelf support up
and away from the oven side and then lift the support away
from the locating bracket at the bottom of the oven side (Fig.
6.9).
Refitting the oven shelf supports
To ret the side support: Locate the tag at the bottom of the
support into the slot in the locating bracket in the oven side
(Fig. 6.10). Now locate the tops of the side arms in the holes
at the top and gently push down.
Fig. 6.5
Fig. 6.6
Fig. 6.7
Fig. 6.8
Fig. 6.9 Fig. 6.10
Broiler pan
Telescopic rail
Telescopic rail
Broiler
tray