Owners Guide
Table Of Contents
- 1. Important safety information
- 2. Range overview
- 3. Cooking tips
- 4. Cooking table
- 5. Cleaning your range
- 6. Troubleshooting
- 7. Installation Instructions
- 8. Service and parts
- 9. Installation safety instructions
- 10. Installation
- 11. Electrical connection
- 12. Final fitting and checks
- 13. Circuit diagram
- 14. Technical data
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
26
You will also need the following tools and equipment to
complete the range installation satisfactorily.
1. Multimeter
2. Electric drill
3. Masonry drill bit & anchors (only required if installing
the range on a stone or concrete oor)
4. Steel tape measure
5. Phillips head screwdriver
6. Flat head screwdriver
7. Allen keys (provided in pack)
8. Level
9. Open-end or adjustable wrench
10. Pencil and ruler
11. Pipe wrenches
12. ⁄ “ (13 mm) socket wrench
10. Installation
Checking the parts:
3 x Telescopic rack with runners Rear Flue Grille
Toe kick Anti-tip device
ArtNo.350-0007 - Plinth USA
7 Mercury control kobs