Owners Manual
Fig. 6.5
Fig. 6.6
14
Installation
NOTE: The AGA TC / DC hotcupboard should arrive with the
top plate in a jacked up position. This is to allow the complete
appliance to be slid onto its plinth when alongside the AGA
Total Control/Dual Control without the top plates clashing.
The hotcupboard top plate should then be adjusted down to
its correct height once the range is in its nal position.
1. Detach hotcupboard from plinth by removing two
screws and tongue bracket from plinth (see Fig. 6.5),
slide hotcupboard forwards and away from rear fixing
bracket (see Fig. 6.6).
EINS 516448
DESN 516449










