Installation Sheet
Table Of Contents
8
9
ENCLOSURE PREPARATION
• Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
• Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
NOTICE
Make sure the dishwasher is plumb and notice
dishwasher can be placed with a small clearance
under the counter top.
• Turning the screwdriver in the direction of the
black arrows will bring the dishwasher back feet
up.
• Turning the screwdriver in the direction of the
white arrows will take the dishwasher rear feet
down.
Installing the Side
Trim Strips
• Remove the
adhesive tape
(Figure A).
• Place the trim strips
on the front edge
of the side walls
(Figure B).
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
NOTICE
Make sure you use the correct trim strip since there is a left and a right side strip. The exible material
should be facing forward (Figure B).