Specifications
AGArangeusa.com
AGA IS A MEMBER OF THE MIDDLEBY RESIDENTIAL LUXURY BRAND PORTFOLIO
INSTALLATION
Range Dimensions
When surveying for range installation the actual
clearance required for the ‘body’ of the appliance
should be increased by ⅜" beyond the figures quote
above. This allows safe margin to take into account the
natural dimensional variations found in major castings.
In particular the width across the appliance recess
could be critical.
Range Base or Hearth
It is essential that the base or hearth on which the
range stands should be level. The base of the built-
in AGA plinth must be level and sit above finished
floor height for service access. The front plinth cover
is removable and must not be obstructed by flooring
or tiles. If necessary the range must be raised by the
thickness of the tiles to ensure the plinth can be
removed.
Minimum Clearance to Combustibles
A gap of at least ½" must be observed between
the rear of the top plate, and the wall behind the
appliance. If the rear wall is of combustible material
there must be a gap of 1".
Clearances
A ⅛" gap is required each side between the range top
plate and adjoining work surfaces that may be fitted,
this is to allow for the safe removal of the top plate
should this be required at a later date. Where ranges
are fitted against side walls a 49/16" side clearance is
required on the right and left hand side for oven doors
access. If the AGA is to be installed in a brick recess,
then the minimum clearance should be increased
by at least ⅜" , to allow for the walls not being square.
In addition a minimum clearance of 39½" must be
available at the front of the range to enable it to be
serviced.
Range Hoods
It is recommended this AGA is fitted with a range
hood. The AGA venting system is located on top of
the AGA between the two hotplates, and is designed
for venting the moisture from the ovens. The range
hood should be positioned not less than the minimum
height as recommended by the manufacturer, from
the top of the AGA.
39" CLASSIC
DUAL CONTROL
ELECTRICGAS